MSD 6AL problem
Thread Starter
Safety Car
Joined: Oct 1999
Posts: 4,101
Likes: 10
From: NorCal
MSD 6AL problem
A buddy of mine has a Cobra replica we're finishing up, and it came equipped with a MSD 6AL pre-installed. It has 12V power on the main supply, but nothing on the red or orange lines. Is the red switched and the orange the distributor line? He didn't get any documentation on the MSD system, so if someone has it, maybe it could be scanned or something? As always, all help is appreciated!
Hans
Hans
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
Advanced
Joined: Aug 2001
Posts: 85
Likes: 0
From: Cheyenne WYO
Re: MSD 6AL problem (Wrencher)
I installed a 6a module in my car. Im thinking the only difference between a 6al is no revlimiter. Same wiring.
I have the way I wired it here, at the bottom of the page. It may help? http://www.weavermill.com/dist/installdist.htm
Tom
I have the way I wired it here, at the bottom of the page. It may help? http://www.weavermill.com/dist/installdist.htm
Tom
