STRIP TEASE!
Thread Starter
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
STRIP TEASE!
and all that was done in about 4-5 hours.. didnt get any of the pass side, but the 1/4 is done on that side along with the rear.. not bad for a razor blade
Thread Starter
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
Re: STRIP TEASE! (daniel77350)
i only painted the nose because i got it back in bare glass.. so i just shot some white on the fenders, hood and valance.. only cost me about 40 bucks to paint the nose.. cuz I have some nice hookups. now its time to paint the whole thing
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Thread Starter
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
Re: STRIP TEASE! (chevluvr)
Yes Its going Electron Blue, just like Pats.. only just a little different.. I'm going to start with a silver base to give the blue that extra oomph..
I used a razor blade to strip the rear of the car... it was easy on the laquer. the t-tops are gunna have to be stripped with a chemical stripper and the nose will be blocksanded with 180 grit.
And all wrinkly 1 dollar bills can be sent directly to me PO box 510 middletown CT 06457... j/k
I used a razor blade to strip the rear of the car... it was easy on the laquer. the t-tops are gunna have to be stripped with a chemical stripper and the nose will be blocksanded with 180 grit.
And all wrinkly 1 dollar bills can be sent directly to me PO box 510 middletown CT 06457... j/k
Thread Starter
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
Re: STRIP TEASE! (rainman69)
yes the car did have a rack.. and yes i did fill them in.. i did it the right way tho. i put some tape on the bottom of the holes and put some fiberglass cloth in there till they had been higher then the actual car.. then i sanded them down smooth.. once i get the ***** to go out in the unheated garage to work again, I'll get more pictures for you.. oh and look closely at the second picture.. try to see what I'm getting at with this.. I'll give you a hint.. he has a red nose.. :blueangel:
Drifting
Joined: Oct 2001
Posts: 1,699
Likes: 1
From: Westampton NJ
Re: STRIP TEASE! (Corzvette69)
It looked like a good fill-in job, just curious...always like to know what things look like to learn something new every day.
Hmm...you have a drunk in your car? :jester
Hmm...you have a drunk in your car? :jester
Thread Starter
Team Owner
Joined: Sep 2001
Posts: 30,958
Likes: 0
From: Middletown Connecticut
Cruise-In IV Veteran
Re: STRIP TEASE! (rainman69)
nope not a drunk.. altho it looks like i was when taking some of these pictures.. another hint.. people mount them on they're walls
Burning Brakes
Joined: Aug 2001
Posts: 1,244
Likes: 24
From: Austin TX
Re: STRIP TEASE! (daniel77350)
Sigh my car is a FUC*ing mess. Bondo, body filler, primer, 3 layers of paint. The aircraft stripper is knocking it out pretty well without worrying about the fiberglass.
[Modified by mrbeaubo, 12:54 AM 1/2/2002]
[Modified by mrbeaubo, 12:54 AM 1/2/2002]