Window Glass stop
Thread Starter
Drifting
Joined: Oct 2007
Posts: 1,458
Likes: 1
From: Collinsville MS
St. Jude Donor '08
Window Glass stop
I am rebuilding the power windows on my 78. I found I was missing one of the stops that bolts to the bottom of the window track. I cannot locate one in any of the vendow books, anybody know where i can find one?
Drifting
Joined: May 2008
Posts: 1,462
Likes: 43
From: Choctaw Country
I you can't find it listed then pull the opposite side and go to a fastener/hardware store. (I live in the oil patch and we got lots of 'em for repairing rigs and such!) Get replacement match and you're good!
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Team Owner
Joined: Sep 2006
Posts: 31,202
Likes: 4,287
From: Westminster Maryland
Hi Eddie,
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
Melting Slicks
Joined: Jun 2005
Posts: 2,239
Likes: 74
From: Palatine, Peoples Republic of Illinois
St. Jude Donor '09-'10-'11-12-'13-'14-'15-'16-'17-‘18
NCM Sinkhole Donor
I just got one from C&S Corvettes in Sarasota FL. Cost me $10 with shipping. Their number is 800-886-5064.
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Hi Eddie,
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Drifting
Joined: Oct 2007
Posts: 1,458
Likes: 1
From: Collinsville MS
St. Jude Donor '08
Hi Eddie,
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
You're right. I didn't see them.
I wonder about them being noted as 'plastic'? Mine are definitely metal with a little bit of rubber 'SKIN' on one end to stop the window from 'banging' into the stop too hard at the top and bottom of the track.
Nice find!!!!
Regards,
Alan
