Ignition timing for 1982
Thread Starter
Intermediate
Joined: Dec 2006
Posts: 48
Likes: 0
From: Prairieville LA
Ignition timing for 1982
Does anyone know what the ignition timing should be for a 1982 C3? It's not the California model. Should be the basic 200 hp model. My manual says to diconnect the EST bypass wire before setting the timing, but refers me to the emissions decal under the hood for the timing setting. Problem is, the decal is MIA. Any help would be appreciated.
Instructor
Joined: Aug 2006
Posts: 158
Likes: 5
From: New jersey
i just did mine and 6 degrees btdc and est disconnected is correct, the est wire can be found on the driver's side near firewall, brown or baig'ist with black line on it, mine was kinda short, be carful when you disconnect it
