Do you have this on your 72?
Thread Starter
Burning Brakes
Joined: May 2007
Posts: 1,108
Likes: 11
From: No Prov RI
Do you have this on your 72?
I was taking some pics.............
and noticed these #'s on what looks like a wraper . Its located against the firewall between the wiper motor and the wiper door lever that triggers the wiper switch.
wiper switch on the firewall
Hammadown
and noticed these #'s on what looks like a wraper . Its located against the firewall between the wiper motor and the wiper door lever that triggers the wiper switch.wiper switch on the firewall
Hammadown
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,853
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
I'll have to check it! I'm going to my office in about 30 minutes to pick up some stuff paper work, I'll pull off the cover and give it a look. I won't be back for a few hours, I have to make some other stops (Steaks, Veggies and Taters). . Cooking out tonight.
It may be the part number tag for the harness, most GM harness' carried a tag to ID them by.
Willcox
It may be the part number tag for the harness, most GM harness' carried a tag to ID them by.
Willcox
Thread Starter
Burning Brakes
Joined: May 2007
Posts: 1,108
Likes: 11
From: No Prov RI
I'll have to check it! I'm going to my office in about 30 minutes to pick up some stuff paper work, I'll pull off the cover and give it a look. I won't be back for a few hours, I have to make some other stops (Steaks, Veggies and Taters). . Cooking out tonight.
It may be the part number tag for the harness, most GM harness' carried a tag to ID them by.
Willcox
It may be the part number tag for the harness, most GM harness' carried a tag to ID them by.
Willcox
......I added a few more pics to the vacume hose color thread
Hammadown
Team Owner
Joined: Sep 2006
Posts: 31,287
Likes: 4,376
From: Westminster Maryland
I didn't find anything at that point on my 71's harness. Mr. Wilcox could well be right about it being a harness ID. I did find a small wrap of light blue tape on the engine harness very close to the firewall connection. I always figured it was an identification.
Regards,
Alan
PS: Now that I've looked at the picture again, I'm not sure just what the tag is on... is it on the vacuum hoses and not the harness?
Regards,
Alan
PS: Now that I've looked at the picture again, I'm not sure just what the tag is on... is it on the vacuum hoses and not the harness?
Last edited by Alan 71; Nov 2, 2008 at 04:13 PM.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,853
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
Alan and Hammad,
I forgot to look, I'm sorry! I have a thread going on the NCRS site for a restoration we are doing and needed some pictures of a 63 spindle support and just got wrapped up in this and forgot to look at my 72.
I'll see if I can find the org. number for the harness, this may validate my theory.
I'll be in the office on Tuesday and I'll check again.
Hammad, Yup! Got them. . . I just need to find the time to finish this. My MIL passed away last month and we have been busy moving things
Wllcox
I forgot to look, I'm sorry! I have a thread going on the NCRS site for a restoration we are doing and needed some pictures of a 63 spindle support and just got wrapped up in this and forgot to look at my 72.
I'll see if I can find the org. number for the harness, this may validate my theory.
I'll be in the office on Tuesday and I'll check again.
Hammad, Yup! Got them. . . I just need to find the time to finish this. My MIL passed away last month and we have been busy moving things
Wllcox
Thread Starter
Burning Brakes
Joined: May 2007
Posts: 1,108
Likes: 11
From: No Prov RI
I didn't find anything at that point on my 71's harness. Mr. Wilcox could well be right about it being a harness ID. I did find a small wrap of light blue tape on the engine harness very close to the firewall connection. I always figured it was an identification.
Regards,
Alan
PS: Now that I've looked at the picture again, I'm not sure just what the tag is on... is it on the vacuum hoses and not the harness?
Regards,
Alan
PS: Now that I've looked at the picture again, I'm not sure just what the tag is on... is it on the vacuum hoses and not the harness?
I think it wraps around a hose and a harness. Ill have to get a better look next week. Iwas only taking random pics of things and that tag caught my eye. Ill take a pic further back with the label centered against the firewall
Hammadown
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
