header question for Brodix heads
Melting Slicks
Joined: Mar 2005
Posts: 2,838
Likes: 10
From: Austin TX
I'd check with Brodix.
And/or see if the recommended gaskets are the same for both the headers and heads.
I believe most Brodix SB heads have a "D" port.
Which size headers are you running 1-5/8 or 1-3/4"?
And/or see if the recommended gaskets are the same for both the headers and heads.
I believe most Brodix SB heads have a "D" port.
Which size headers are you running 1-5/8 or 1-3/4"?
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
Brodix Catalog recomends FPP-1404 or cometic C5415 exhaust gasket for the IK180
Fel pro FPP-1404 square, 1.50 port height. 1.50 port width.
Hedman elite vette header HED-68308, 1 5/8 primary tubes.
www.brodix.com PH # 479-394-1075
Headman headers PH # 562-921-0404
Fel pro FPP-1404 square, 1.50 port height. 1.50 port width.
Hedman elite vette header HED-68308, 1 5/8 primary tubes.
www.brodix.com PH # 479-394-1075
Headman headers PH # 562-921-0404
Last edited by Little Mouse; Dec 8, 2008 at 11:14 PM.
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
