calling budman68
Le Mans Master
Joined: Sep 2000
Posts: 9,078
Likes: 7
From: DFW TX
Cruise-In VII Veteran
St. Jude Donor '07
Yes, the only issue that came up was a mis-aligned rear cam bearing. I will have to pull the rear freeze plug and try to align it from the back. If that doesn't work, I will need to pull it all apart and take it back to the machinest.
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
I went to pick up a block looked at it did not like the way the cam bearings were made them fix it before I took it home.
I had no problem telling the "expert" his people did not even know how to put in a set of cam bearings.
I should buy myself a cam bearing tool the luxury of just borrowing the cam tool from the machine shop has been long gone.
I tell myself old blocks have to be cleaned up at the machine shop so why should I buy a tool for something anybody can do.
I had no problem telling the "expert" his people did not even know how to put in a set of cam bearings.
I should buy myself a cam bearing tool the luxury of just borrowing the cam tool from the machine shop has been long gone.
I tell myself old blocks have to be cleaned up at the machine shop so why should I buy a tool for something anybody can do.
Last edited by Little Mouse; Jan 29, 2009 at 01:35 PM.
Le Mans Master
Joined: Sep 2000
Posts: 9,078
Likes: 7
From: DFW TX
Cruise-In VII Veteran
St. Jude Donor '07
The "expert" that prepped my block was a joke. Will never bring anything back to them, even if they have been in business for almost 75 years. New "expert" runs a sparkling clean shop and puts out a nice product. Now I am a strong believer in interviewing the person I will be donating handfuls of money to.
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
The "expert" that prepped my block was a joke. Will never bring anything back to them, even if they have been in business for almost 75 years. New "expert" runs a sparkling clean shop and puts out a nice product. Now I am a strong believer in interviewing the person I will be donating handfuls of money to.
trying to assemble something right.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Le Mans Master
Joined: Sep 2000
Posts: 9,078
Likes: 7
From: DFW TX
Cruise-In VII Veteran
St. Jude Donor '07
and didn't do a very good job passing down the family trade.
Melting Slicks
Joined: Aug 2006
Posts: 3,429
Likes: 20
From: Kingston Ontario
