Stripping and paint question
Thread Starter
Advanced
Joined: Dec 2007
Posts: 89
Likes: 0
From: Clayton North Carolina
Stripping and paint question
I have searched and read some of the posts regarding stripping and painting. What I have not been able to find is if anyone has experience with using the Captain Lee's Spra stripper on their urethane bumpers. I have an 81 that I am getting ready to strip and paint and would like to know if anyone has an issue with using this product to strip the bumpers, both front and back??
Thanks in advance for your responses
Mark
Thanks in advance for your responses
Mark
Melting Slicks
Joined: Sep 2007
Posts: 2,429
Likes: 0
From: Tucson AZ
Being a USAF trained painter, and going on to paint professionally since 1975, I was taught not to use chemical strippers on fiberglass, composites, rubbers, etc. I've never done it, so I can't give you test results.
I'm sure you'll get good info here,
BBTank
I'm sure you'll get good info here,
BBTank
C6 the C5 of tomorrow
Joined: Nov 2000
Posts: 6,665
Likes: 2
From: Twin Cities Minnesota
There IS a search you know...
Some people use strippers and are happy with the results.
those who know better use a razor blade. Faster, cheaper, easier, cleaner, less damage to the body.
Some people use strippers and are happy with the results.
those who know better use a razor blade. Faster, cheaper, easier, cleaner, less damage to the body.
Burning Brakes
Joined: Jan 2009
Posts: 1,224
Likes: 1
From: Clarksville Indiana
Check this guys video, razor blades look like the way to go...
http://www.corvette-restoration.com/...ng%20paint.AVI
http://www.corvette-restoration.com/...ng%20paint.AVI
