Hooker side mount headers
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 836
Likes: 26
From: Harrisburg Pa
Hooker side mount headers
I have a 69 vette with a big block, it has Edelbrock performer RPM heads # 6055 stamped in the head, I think these are Rectangular port heads, I dont know how to tell the difference between oval and rect ports, is this just on the intake ports or what.
My question is, I want to buy a set of Hooker side mount headers with side exhaust for a big block to fit my heads.
Some one must have done this before!
My question is, I want to buy a set of Hooker side mount headers with side exhaust for a big block to fit my heads.
Some one must have done this before!
Le Mans Master
Joined: Apr 2007
Posts: 7,353
Likes: 72
From: Graceland in a Not Correctly Restored Stingray
They should be either #60559 or #605519 (polished) RPM 454-R rectangle intake port heads. The oval port versions all begin with #604...
Plan on hanging my Hooker sidemounts on a set myself, tho I got the bare ones so I could spec my own valves, springs, keepers... I may mock them up sometime soon just to make certain, but don't expect any issues since the exhaust ports are in the stock location. FWIW, they're going on a 427, several of which I've built for myself over the years.
Yes, to anyone who knows the exhaust ports could use a little help, I'm having them worked to improve flow a few % to take better advantage of the >.600" solid roller going in, after which the bang-for-the-buck factor will have made these heads the right call for my purposes. (Should you get tempted to play with them yourself, I advise leaving the floors alone.)
TSW
Plan on hanging my Hooker sidemounts on a set myself, tho I got the bare ones so I could spec my own valves, springs, keepers... I may mock them up sometime soon just to make certain, but don't expect any issues since the exhaust ports are in the stock location. FWIW, they're going on a 427, several of which I've built for myself over the years.
Yes, to anyone who knows the exhaust ports could use a little help, I'm having them worked to improve flow a few % to take better advantage of the >.600" solid roller going in, after which the bang-for-the-buck factor will have made these heads the right call for my purposes. (Should you get tempted to play with them yourself, I advise leaving the floors alone.)
TSW
Le Mans Master
Joined: Apr 2007
Posts: 7,353
Likes: 72
From: Graceland in a Not Correctly Restored Stingray
We'll be looking for an upcoming thread with your glowing about how sweet they look, sound (what inserts you going with?) and perform; followed shortly thereafter by one proclaiming your entry into the "Hooker tattoo" club. 
Race Director
Joined: Feb 1999
Posts: 16,978
Likes: 7
From: In Dreams There Is Truth Ohio
Tom is correct, doesn't matter what the intake port is, rectangular, or round, exhaust ports are the same.
what you want to do is bolt a gasket to the header flange and match the bolt holes. Most of the time the holes will be off a fraction of an inch.
what you want to do is bolt a gasket to the header flange and match the bolt holes. Most of the time the holes will be off a fraction of an inch.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Le Mans Master
Joined: Apr 2007
Posts: 7,353
Likes: 72
From: Graceland in a Not Correctly Restored Stingray
Sweet Thunder has a sound clip.
http://www.sweet-thunder.com/chamber..._corvette.html
In comparison, word is the Hooker MaxFlows have a mellower, deeper tone.
http://www.sweet-thunder.com/chamber..._corvette.html
In comparison, word is the Hooker MaxFlows have a mellower, deeper tone.
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 836
Likes: 26
From: Harrisburg Pa
Le Mans Master
Joined: Apr 2007
Posts: 7,353
Likes: 72
From: Graceland in a Not Correctly Restored Stingray
The STS's sure sounded better than those packs, tho a little on the tinny side to my ear. Of course, the open pipes sounded awesome IMHO. Surely someone around here has a clip of a shark w/MaxFlows. A member posted some dyno runs with them last year, but the links are dead. No detrimental effect vs. open sidemounts, BTW.
Racer
Joined: Oct 2004
Posts: 281
Likes: 9
From: New England
STS baffles, plus the end caps on the STS baffles are only Chevy Freeze plugs so if you drill to many holes while tuning them just get a new $1.00 freeze plug from NAPA and start over. I ended up removing them completely and love them. Just yesterday I was taking a ride and on the street an older gentlemen and his wife were walking by while I was idling at a light, I had my window up because it was cold so I could not hear what he was saying to me ,but he pointed to his ear a few times , and I said to myself " another old fart who does not like my side pipes " but instead he pointed to his ear again and gave me a thumbs up approval along with his wife!!
PS : I can say old fart because I am also 62 years old.
