console removal

Reply Subscribe

Thread Tools

Search this Thread

Mar 3, 2009 | 07:00 PM

levdog

Thread Starter

7th Gear

Joined: Mar 2009

Posts: 7

Likes: 0

From: ashford al.

console removal

trying to remove the center console on my '80, is there anything i need to know other than removing the phillips screws?

Mar 3, 2009 | 07:18 PM

GUSTO14

Le Mans Master

Joined: Sep 2003

Posts: 8,812

Likes: 2,029

From: eastern NC

Quote:

Originally Posted by levdog

trying to remove the center console on my '80, is there anything i need to know other than removing the phillips screws?

Yes, there is a through bolt at the very rear, center of the console. It goes into the storage compartment and has a nut on it. Reach in there under the lid and you will feel it. Use a 1/4" drive with a socket and it will come right off.

Good luck... GUSTO

Mar 4, 2009 | 10:29 AM

Easy Mike

Team Owner

Joined: Jun 2000

Posts: 38,923

Likes: 1,481

From: Southbound

Cruise-In II Veteran

Quote:

Originally Posted by levdog

trying to remove the center console on my '80, is there anything i need to know other than removing the phillips screws?

It's plastic and it will break in a heart beat. Get the AIM. AIM shows how the thing is mounted including the hidden screws beneath the center cluster.

Mar 4, 2009 | 10:39 AM

jdp6000

Melting Slicks

Joined: Jul 2005

Posts: 2,740

Likes: 3

From: Aurora Ontario

All is easy. Just remember ther are two small bolts...one on each side that attach the consol to the center guage cluster. You need to remove the side panels to see the bolts.

Once you have loosened the whole thing up it comes out easier if you shift the car in to L1...lowest opsition on the shifter.

Jim

Reply Subscribe