When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey 81' guys, (or non 81' guys who have an 81' AIM) :D . I need a page from the AIM for my 81'. I am installing my new interior and figured I might as well put the speakers back in. The rear speakers go in the corner, under the plastic speaker grills. The speakers attach to the grills. The grills attach to a metal bracket that attaches to some tabs in the corner. I have the grills, but not the metal brackets that hold them. Could somebody post or email me the page from the AIM that shows these metal brackets so that I can make something up. I am assuming the AIM would have the appropriate measurements for the spacing of the holes, and measurements for how big I need to make them. Thanks.
Justin,
Hope this helps, sometimes I get more confused looking at the right way to do these things.
This link takes you to the pic. http://www.bcpl.net/~dvdme/81vette1.JPG
I didn't want to eat up too much forum space :eek:
Good Luck,
John
justin, if you can't find it anywhere else let me know and give me a fax number and i'll fax you the page(s) you need. e-mail me if you need at clutch_dust@hotmail.com.
Thanks guys. John got me taken care of. I don't know if I want to start fabricating something like that when it would be so easy to just order them from Riks. :D I better go check to see how much they are. :D :seeya