How do you attach new door panels?
Racer
Joined: Feb 2001
Posts: 318
Likes: 0
From: Morrisdale Pa
Re: How do you attach new door panels? (Tom McCabe)
I haven't put my new ones on yet but when I put old panels on the last time I put clear silicone (like the blue gasket stuff) on both pieces of the velcro and then held the door panel together with a couple C-clamps overnight. Never came loose and you couldn't tell it was even on there. Hopefully my new ones won't need that but I'll do it if I have to.
Slide
Slide
Le Mans Master
Joined: Sep 2000
Posts: 5,635
Likes: 4
From: Orlando Floriduh
Re: How do you attach new door panels? (slide)
I have put door panels on but all of them were Eckler's. In my case the velco pieces on the panel were not compatible with the originals. I had to drill out the rivets and replace the receptors on the door with the ones that came with the doors. They worked great. I just snapped them together. :D
[Modified by silvervetteman, 4:21 AM 1/28/2002]
[Modified by silvervetteman, 4:21 AM 1/28/2002]
Melting Slicks
Joined: Apr 1999
Posts: 2,675
Likes: 13
From: Sudbury MA
Re: How do you attach new door panels? (slide)
Slide,
Maybe I am misunderstanding you: Did you glue the panels to the door? How can you remove them if you need to get in there to repair anything?
Maybe I am misunderstanding you: Did you glue the panels to the door? How can you remove them if you need to get in there to repair anything?
Platinum Supporting Dealership
Joined: Dec 1999
Posts: 6,425
Likes: 1
From: Traveling the US
Re: How do you attach new door panels? (paul79)
I think pre-1978 had those velcro tabs and 78 and up were screws. You can still see the indents in the inner door though on 78 and up where they used to use the heavy duty velcro.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Melting Slicks
Joined: Sep 1999
Posts: 2,738
Likes: 1
From: Deep in the Heart of Dixie Alabama
Re: How do you attach new door panels? (paul79)
I have replaced pre '78 and '78 and later. I remember they both had screws
and the pre ' 78 had had both screws and velcro.
Good Luck.....
and the pre ' 78 had had both screws and velcro.
Good Luck.....
Safety Car
Joined: Apr 2001
Posts: 3,581
Likes: 28
From: Spring, Texas
Re: How do you attach new door panels? (bamavettes)
MY '72 has both screws and the "plastic velcro" tabs. The slightest warp or misalignment will prevent these tabs from sticking and holding. :smash:
Intermediate
Joined: Nov 2001
Posts: 34
Likes: 0
From: Vancouver BC
Re: How do you attach new door panels? (SharkAttack)
where did you buy your doors from. my vette had some major water damage and I need to replace the door, I would like to keep the black all carpeted deluxe doors..
Thanks
Jayme
Thanks
Jayme
Thread Starter
Le Mans Master
Joined: Aug 2000
Posts: 7,484
Likes: 457
From: POTSDAM NY/Punta Gorda FL
Re: How do you attach new door panels? (downtownj)
You can get doors from most of the dismantelers, they are cheap since the fit basically the same for the whole run, I talked to a vendor a couple of weeks ago that just buried 50 of them and is going to do 50 more, he has no use for them after he strips them out.
Tom
Tom
