C3 SBC Engien Specs wanted
#1
Pro
Thread Starter
C3 SBC Engien Specs wanted
i am looking for specs for some old engines
such as
cam specs such as
Lift I and E
Duration .05 and seat to seat
Intake center line
cam lobe center angle
Lifter type
I and E event timeings if have .05 and seat to seat
Compression ratieo
head and intake flows
Head Valve sizes
carb Flow and if 2 or 4 barrel
im looking for this info for the fallowing engines
L46, L48, LT-1, L82, L83
all C3 engines
i would like them to use as comparison for my current rebuild and just to see what could be done to one if i get my hands on one someday or even just to get one back to spec like it was back in the day
thanks Ryan
such as
cam specs such as
Lift I and E
Duration .05 and seat to seat
Intake center line
cam lobe center angle
Lifter type
I and E event timeings if have .05 and seat to seat
Compression ratieo
head and intake flows
Head Valve sizes
carb Flow and if 2 or 4 barrel
im looking for this info for the fallowing engines
L46, L48, LT-1, L82, L83
all C3 engines
i would like them to use as comparison for my current rebuild and just to see what could be done to one if i get my hands on one someday or even just to get one back to spec like it was back in the day
thanks Ryan
Last edited by PuddleJumper; 03-24-2009 at 06:30 PM.
#2
#5
Pro
Thread Starter
wow the 265s cam i way different from what i was thinking it was
this should help me if i get my hands on an old engine from then.
Ryan