Doing your own alignment
Thread Starter
Pro
Joined: Aug 2006
Posts: 649
Likes: 8
From: COOKEVILLE TN
Doing your own alignment
Who has done their own alignment here...........Any instructions for a '73. I just finished the rebuild on the front end and replaced a bent lower cross shaft and now I have some serious, serious tow out !
Le Mans Master
Joined: Nov 2008
Posts: 5,691
Likes: 12
From: columbus oh
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
above, OR email me/search for some links of doing it yourself...
it will take some time to set up your concrete garage floor, and to set up some simple tools, like fishing line between jack stands
and a simple ref table converting degrees into so much inches over a 15-20" rim diameter....measure off the RIM like the alignment machines, NOT off tires...
it will take some time to set up your concrete garage floor, and to set up some simple tools, like fishing line between jack stands
and a simple ref table converting degrees into so much inches over a 15-20" rim diameter....measure off the RIM like the alignment machines, NOT off tires...
Instructor
Joined: Apr 2005
Posts: 200
Likes: 0
From: Finksburg Maryland
Just a quick warning. Once you get the toe set, watch the tires closely. A wrong caster setting generally doesn't wear tires, a wrong camber setting will wear tires over time, but a wrong toe setting will destroy the tires very quickly.
Race Director
Joined: Jan 2007
Posts: 14,907
Likes: 3,329
From: NYC NY
Here take a look at this http://www.carcraft.com/howto/48938/index.html I hope you find it helpfull.
