stall speed prob
Thread Starter
Melting Slicks
Joined: Sep 2001
Posts: 3,094
Likes: 0
From: Dover De
stall speed prob
I have a 2000 stall in my car. After i changed motors and transmissions ( i pulled them and put them back as one ) Now my car does not like to sit still she pulls at 600 RPM in drive. I have curb idle set at 900-800 when i put her in gear she wants to shut off. Any guess what to check or do? :smash:
Racer
Joined: Jul 2001
Posts: 281
Likes: 1
From: SA
Re: stall speed prob (emsrescu)
Mmmm thats weird. With a higher stall u should get less drag on the engine at idle. What sort of TQ converter are u using? Converters also rely on engine rpm to pump fluid thru it which may change the flash rpm on diff engine combos. Still i think something must be gone inside the converter. They are pretty complex inside.
Safety Car
Joined: Aug 2000
Posts: 3,711
Likes: 43
From: San Antonio TX
Re: stall speed prob (emsrescu)
This is a little confusing. Is this a new engine with a different cam perhaps? The problem you describe generally happens when a cam with lots of duration and tight lobe centers is installed. The engine doesn't develop sufficient idle torque to overcome the drag of the converter and tries to pull through traffic lights if you find an idle speed where it doesn't kill the engine or, it kills the engine when you put it in drive.
If this is the same engine with no other changes, you may have an ignition timing problem. Check you initial advance.
If this is the same engine with no other changes, you may have an ignition timing problem. Check you initial advance.
