rear diff
Thread Starter
Burning Brakes
Joined: Jul 2009
Posts: 1,132
Likes: 14
From: A town SC
rear diff
new hear and have a ? beenplaying with chevys for a long time, purchased 1981 and man these cars are built differently, question is are there halfshafts and stub axles availible in a 1350 series joint. also whats the power limit (hp)for these independant diffs?
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
There are half shafts and ujoints that can handle the power but your aluminum carrier is going to be trouble. The aluminum ones have been known to self destruct under some power. You can retrofit and iron unit, 79 and earlier years to the bat wing and these are stronger.
Safety Car
Joined: Nov 2008
Posts: 3,713
Likes: 550
From: Seattle Washington
The 1350 u joint is avalable for Your rear end using all GM or Reproduction Parts. If Your Car came with a 4 Speed it would of had them OEM. Its a bit Confusing the 80-81 came with the 1350 u -Joint only with a 4 speed and all 82s came with them even thow a 4 speed wasn't avalable in 82. You will need to change the Yokes the Rear end, the 1/2 shafts, and the Spindle Flanges. I just did this to my 80. You can wait for them to come on e-bay or buy them in Reproduction from Van Steel. e-bay is about 1/2 Price and 1/2 of the parts are junk. Van Steel also offers Billet Caps for the U-Joints.
