Replace or not AC vacuum lines
Thread Starter
Racer
Joined: Aug 1999
Posts: 341
Likes: 1
From: Levittown Pa
Replace or not AC vacuum lines
Ok I am in the middle of rebuilding the air conditioner and I was going to repace the vacuum lines that go from the climate control to the vacuum valves.
I pulled out the old lines and cleaned them up and they look pretty darn good, molded ends are in great shape including the molded part that mounts on the vacuum slector. No cuts or cracks. Even the fire wall grommet clean up good no cracks.
I bought a new set from DR and they don't have any molded ends or parts at all or grommet.
So should I reuse the old ones or go ahead and put the new set in?
opinions please
I pulled out the old lines and cleaned them up and they look pretty darn good, molded ends are in great shape including the molded part that mounts on the vacuum slector. No cuts or cracks. Even the fire wall grommet clean up good no cracks.
I bought a new set from DR and they don't have any molded ends or parts at all or grommet.
So should I reuse the old ones or go ahead and put the new set in?
opinions please
