Frame finished!!!!
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,411
Likes: 0
From: Dandridge TN
Frame finished!!!!
Just letting out a little excitement! :) Finished up the frame today by installing the brake and gas line. Waiting on the machine shop to finish the machine work on my motor and as soon as they do I can finish the rebuild/installation and will be ready for the body. Looks like I will be ready for summer, hopefully. :cheers: You guys have been a big help during this frame off restoration. Thanks!
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Re: Frame finished!!!! (Steve Adkins)
Sounds like you are going to have one nice vette when all is said and done. Congrats and keep up the good work.
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,411
Likes: 0
From: Dandridge TN
Re: Frame finished!!!! (454Big)
454Big,
I bought a 100lb sand blaster from Sears, and it done a great job. It stripped it down to the metal. I used Rustoleum primer out of can for the base coat and Rustoleum satin for the final two coats. It turned out real nice.
I bought a 100lb sand blaster from Sears, and it done a great job. It stripped it down to the metal. I used Rustoleum primer out of can for the base coat and Rustoleum satin for the final two coats. It turned out real nice.
Burning Brakes
Joined: Aug 2000
Posts: 1,080
Likes: 1
From: Frankfurt, Taunus Hills
Re: Frame finished!!!! (Steve Adkins)
Well, my decision is now done.
The frame was shipped to the sandblaster on Thursday and they will do the job on monday and tuesday. The tuesday the frame will be picked up by the powdercoaters and instantly zincpowdered, then color powdered.
I handed some extra bucks to the blaster so that they will clean every nook and cranny in the frame!
By friday I will have my frame back home. We will see......
The frame was shipped to the sandblaster on Thursday and they will do the job on monday and tuesday. The tuesday the frame will be picked up by the powdercoaters and instantly zincpowdered, then color powdered.
I handed some extra bucks to the blaster so that they will clean every nook and cranny in the frame!
By friday I will have my frame back home. We will see......
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,411
Likes: 0
From: Dandridge TN
Re: Frame finished!!!! (454Big)
Looks like you are going to have a showroom frame. Keep me posted on how this frame turns out when you get it back. I considered on going to that extent on my frame, but the budget didn't allow it. I knew I was going have to buy alot of new stuff for my vette that's why I decided to do the frame myself. :yesnod: Good luck on yours!!! :)
Drifting
Joined: Feb 2000
Posts: 1,607
Likes: 0
From: Clarksville,Tn,USA TN
Re: Frame finished!!!! (Steve Adkins)
Sounds like you have got it going on Frank...
I am with Steve though on this one..let the available finances direct me. I did POR-15 mine though..
Neil in Tenn
I am with Steve though on this one..let the available finances direct me. I did POR-15 mine though..
Neil in Tenn
Drifting
Joined: Feb 2000
Posts: 1,607
Likes: 0
From: Clarksville,Tn,USA TN
Re: Frame finished!!!! (Steve Adkins)
Thanks Steve,
Where is Dandridge at in Tenn....and what year is your vette? I got some stuff laying around from my rebuild if you need something.
Neil in Tenn
Where is Dandridge at in Tenn....and what year is your vette? I got some stuff laying around from my rebuild if you need something.
Neil in Tenn
Thread Starter
Drifting
Joined: Jan 2002
Posts: 1,411
Likes: 0
From: Dandridge TN
Re: Frame finished!!!! (Nomad78SA)
Neil, Dandridge is about 30 min east of Knoxville. I am restoring a 69 vert! :yesnod: I am waiting on my engine to return from the machine shop now. I am rebuilding a #'s matching 350/350. I don't know if anything you have laying around will work on my 69. :confused:, but I appreciate you telling me. If I run across anything that I think might be interchangable I will let you know. How far are you from Knoxville?
Burning Brakes
Joined: Aug 2000
Posts: 1,080
Likes: 1
From: Frankfurt, Taunus Hills
Re: Frame finished!!!! (Steve Adkins)
Frame is back now!
Its blasted and coated and it look gorgeous!!!
My Windows XP has given me the experience that it wont communicaty with my webserver, so I can´t upload pics.
Anybody able to help????
Its blasted and coated and it look gorgeous!!!
My Windows XP has given me the experience that it wont communicaty with my webserver, so I can´t upload pics.
Anybody able to help????
Drifting
Joined: Feb 2000
Posts: 1,607
Likes: 0
From: Clarksville,Tn,USA TN
Re: Frame finished!!!! (TONYS68L36)
Steve,
I am on the Kentucky border where I-24 meets it about 50 miles north of Nashville. Teresa lives close to you looking for someone to check her car out.
http://forums.corvetteforum.com/zerothread?id=252810
We will have to meet one day for sure...
Neil in Tenn
I am on the Kentucky border where I-24 meets it about 50 miles north of Nashville. Teresa lives close to you looking for someone to check her car out.
http://forums.corvetteforum.com/zerothread?id=252810
We will have to meet one day for sure...
Neil in Tenn