My '69 Speaker solution
Thread Starter
Instructor
Joined: Jun 2001
Posts: 229
Likes: 1
From: Uxbridge MA
My '69 Speaker solution
I purchased some Infinity 4"x6" speakers and found the opening was a bit bigger than the speaker itself. Thanks to some insight from the forum members, I spent the day gathering an fabricating brackets for my side-kick panel speakers. Here are a few pics of my solution, thanks to Home Depot. Enjoy....
[Modified by andyg, 6:15 PM 2/24/2002]
[Modified by andyg, 6:15 PM 2/24/2002]
Safety Car
Joined: Mar 2000
Posts: 4,078
Likes: 27
From: Northeast South Dakota
Re: My '69 Speaker solution (andyg)
Speaker solution = true duals with no cats and flowmasters or chambered exhaust. :cool: No need for speakers if you can't hear them anyway. :cheers:
Thread Starter
Instructor
Joined: Jun 2001
Posts: 229
Likes: 1
From: Uxbridge MA
Re: My '69 Speaker solution (Dalannex)
True. Chambered is my next purchase, so I guess my speakers are moot. But, on a moonlight night with the tops and engine off, I will need those speakers for the Barry White music that send my wife over the top(literally or figuratively, your choice.....) :D
---Andy
---Andy
Tech Contributor
Joined: Aug 1999
Posts: 15,173
Likes: 3,982
From: Connecticut, USA
Re: My '69 Speaker solution (andyg)
Question on the speakers, do you have the original radio and if so what ohm ratign are those speakers? Wondering on the sound quality.
Thanks,
Gary
Thanks,
Gary
Thread Starter
Instructor
Joined: Jun 2001
Posts: 229
Likes: 1
From: Uxbridge MA
Re: My '69 Speaker solution (gtr1999)
Bubba got to the original radio, unfortunatly.... These speakers are rated to 4 ohms@40W RMS. I listened to them before buying. For their small size they sound pretty good; But due to their size, they cannot create much bass. They rate down to 70Hz, but I would guess its more like 150Hz. These are better than the Bubba Kraco speakers with the ripped cone on the drivers side I took out...
---Andy
---Andy
