Park Brake Console Installation
Thread Starter
4th Gear
Joined: Aug 2009
Posts: 4
Likes: 0
Park Brake Console Installation
Hi.........I recently purchased a new Park Brake Console. I'ts black and intend to leave black replacing the paint worn (saddle) one.
Question: Is tha a difficult R&R Installation? Thanks, Steve G
'81 Hardtop Built in St. Louis.
Question: Is tha a difficult R&R Installation? Thanks, Steve G
'81 Hardtop Built in St. Louis.
Le Mans Master
Joined: Mar 2001
Posts: 6,640
Likes: 287
From: Ann Arbor Michigan
No, it's easy. You'll need to take the carpet covered side panels off the ceter PB tunnel then there are a few screws that hold it to the tunnel and 2 in the front that holds it to the shifter console. You will find it easier to work on it if you remove the seats (not mandatory but helpful). I have the left seat and side panel off my 78' right now if you need any kind of photos.
Gary
Gary
Thread Starter
4th Gear
Joined: Aug 2009
Posts: 4
Likes: 0
Emergency Brake Console
No, it's easy. You'll need to take the carpet covered side panels off the ceter PB tunnel then there are a few screws that hold it to the tunnel and 2 in the front that holds it to the shifter console. You will find it easier to work on it if you remove the seats (not mandatory but helpful). I have the left seat and side panel off my 78' right now if you need any kind of photos.
Gary
Gary
