Another tdc question
Thread Starter
Instructor
Joined: Aug 2007
Posts: 224
Likes: 1
From: SHERMAN TEXAS
Another tdc question
im slowly putting an 81 block back together. i put on the balancer for fun and im not sure if the timing mark on balancer is positioned right. the piston is falling by the time the line reaches 0. when the #1 piston is at exact tdc the line on the balancer is at 12 o clock. educate me please. thanks colin75.
the timing mark on the balancer is approx 45 deg counterclockwise from the keyway. the balancer and cover should be original equiptment.
the timing mark on the balancer is approx 45 deg counterclockwise from the keyway. the balancer and cover should be original equiptment.
Last edited by colin75; Oct 23, 2009 at 04:31 PM.
