distributor problem.
Thread Starter
Racer
Joined: Jul 2007
Posts: 269
Likes: 0
From: WV
distributor problem.
I picked up a summit brand hei distributor for a sbc/bbc at the scratch and dent sale on the 14 and went to install it today and the shaft into the motor is different it has a smaller gear length wise on it and the shaft has extra grooves and it will not seal to the gasket on the intake manifold. What is this distributor for will it work on my 350... I can e mail pictures of both if it will help someone id them..
Melting Slicks
Joined: Oct 2002
Posts: 2,317
Likes: 111
From: St Louis MO
We'd need photos for this one...
Put your pictures on a site like Photobucket, and then link to them in your post on CF.
__________________
1978 Corvette
406 SBC AFR heads Lunati roller Quadrajet TH-350 3.08
11.59 sec / 118.9 mph 1/4 mile
Put your pictures on a site like Photobucket, and then link to them in your post on CF.
__________________
1978 Corvette
406 SBC AFR heads Lunati roller Quadrajet TH-350 3.08
11.59 sec / 118.9 mph 1/4 mile
Racer
Joined: Dec 2009
Posts: 308
Likes: 2
From: South Italy
The last week I have installed this one:
http://www.summitracing.com/parts/MSD-8362/?image=large
you can see the differnce betwen your purchased and mine.
I'm running without ECM.
I hope this help you .
http://www.summitracing.com/parts/MSD-8362/?image=large
you can see the differnce betwen your purchased and mine.
I'm running without ECM.
I hope this help you .
