AWD conversion...
Thread Starter
Cruising
Joined: Jan 2010
Posts: 10
Likes: 0
AWD conversion...
A few years back acouple of guys in Poland built an AWD stingray that got turbocharged and used in drag racing. The thing was very fast
I've found links to it in this forum, and the SY/TY forums and noticed something.... nobody else has done it.
Is this right, was it a one-of-a-kind hot rod? Has anyone else attempted this since? Here's a link if you haven't seen it.
http://forums.corvetteforum.com/c3-t...ngray-awd.html
I've found links to it in this forum, and the SY/TY forums and noticed something.... nobody else has done it.
Is this right, was it a one-of-a-kind hot rod? Has anyone else attempted this since? Here's a link if you haven't seen it.
http://forums.corvetteforum.com/c3-t...ngray-awd.html
Team Owner
Joined: Sep 2006
Posts: 31,315
Likes: 4,421
From: Westminster Maryland
Haven't there been some pictures of various Bubbas' versions of AWD?
I think they usually involve the chassis from a 1952 International Carry-All and a 77 Corvette body.
Regards,
Alan
I think they usually involve the chassis from a 1952 International Carry-All and a 77 Corvette body.
Regards,
Alan
Melting Slicks
Joined: Aug 2006
Posts: 3,429
Likes: 20
From: Kingston Ontario
Thread Starter
Cruising
Joined: Jan 2010
Posts: 10
Likes: 0
Race Director
Joined: Apr 2000
Posts: 17,676
Likes: 201
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
The guy from Poland who owns that 4 wheel drive Turbo Vette is a member here. He had a thread going for the whole or most of the buildup if I remember correctly.
He said he went with 4 wheel drive because the "tracks" were no good there and there would be no traction at all with 2 wheel drive. I believe they only have run down abandoned air strips to race on
He said he went with 4 wheel drive because the "tracks" were no good there and there would be no traction at all with 2 wheel drive. I believe they only have run down abandoned air strips to race on
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Thread Starter
Cruising
Joined: Jan 2010
Posts: 10
Likes: 0
Managed to find their photo gallery of the AWD build. Not exactly an instruction manual, but the pictures could go a long way to figuring out how to build the frame. I've been thinking about a good Vette-rod project since I had to sell my old one. If I could find a good donor vette (unfinished or basket-case) for less than $2,500, I wouldn't even shed a tear cutting on the frame to make it happen.
Anyway, here's the link...
http://www.michaelrenz.com/syvette/
Anyway, here's the link...
http://www.michaelrenz.com/syvette/
