72 vert manual windows problem
Thread Starter
Intermediate
Joined: Mar 2008
Posts: 43
Likes: 0
72 vert manual windows problem
I have a 72 vert that has about a 1/4 " gap between the top of window and weatherstripping
when in the fully closed position. both window cranks are fully operational (not stripped), I am hesitant to apply any more pressure on cranks when closing window in fear of breaking cranks or another part. Thanks in advance on all recommendations
when in the fully closed position. both window cranks are fully operational (not stripped), I am hesitant to apply any more pressure on cranks when closing window in fear of breaking cranks or another part. Thanks in advance on all recommendations
Team Owner
Joined: Sep 2006
Posts: 31,301
Likes: 4,389
From: Westminster Maryland
Hi f66,
It sounds like perhaps the top 'stop' in each of the two window tracks in each door may need a bit of adjustment.
The interior door trim panels need to come off to get at the screws to adjust.
Regards,
Alan
It sounds like perhaps the top 'stop' in each of the two window tracks in each door may need a bit of adjustment.
The interior door trim panels need to come off to get at the screws to adjust.
Regards,
Alan
Thread Starter
Intermediate
Joined: Mar 2008
Posts: 43
Likes: 0
