will it fit?

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2010 | 10:07 PM

#21

Grumpy 427

Melting Slicks

Joined: Oct 2008

Posts: 2,154

Likes: 69

From: Regina Sk Canada

Here are the pictures of the finished linkage. we had to cut lengthen and weld an inch into the throttle bracket at the rear of the carb, i bought the cruise bracket from Edelbrock. And had to use the old cruise stud off the QJ to use as the kick down mount.

Mar 15, 2010 | 06:58 PM

#22

Grumpy 427

Melting Slicks

Joined: Oct 2008

Posts: 2,154

Likes: 69

From: Regina Sk Canada

I got the filter and air cleaner top today. The bottom drop base is your typical made in china base from Edelbrock .

Mar 15, 2010 | 07:47 PM

#23

Ganey

Race Director

Joined: Apr 1999

Posts: 11,520

Likes: 13

From: CORVETTE 77 385 C.I. TEXAS

Looks good!

I have an old Edelbrock drop base Made in the USA maybe & used a Mr. Gasket lid (now the second one) since I did not want the Edelbrock script.

Mar 15, 2010 | 08:27 PM

#24

Grumpy 427

Melting Slicks

Joined: Oct 2008

Posts: 2,154

Likes: 69

From: Regina Sk Canada

This top is the recreation of the Mr Gasket top. Same one used for the Ford Hipo 289.

http://www.racingpowercompany.com/pr...roducts_id=183

I have a 350/350 turbojet decal coming for the lid as well.

Reply Subscribe