Need Recommendations for a Timing Set..
Race Director
Joined: Jan 2000
Posts: 13,025
Likes: 2,266
From: Corsicana, Tx
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
That's a MKIV...early style.
JIM
JIM
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,892
Likes: 3
From: Springfield Illinois
Does the cam button "float" in place? Every thing is Comp Cams.. cam, timing chain, and the button. The button would fall out of place if it wasn't for me or the timing cover holding it in place.. I ask this because the gear drive i was going to run held the button in place.
Race Director
Joined: Jan 2000
Posts: 13,025
Likes: 2,266
From: Corsicana, Tx
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
The little lock tab plate will hold it in place,,,but honestly it can't go anywhere once you install cover. Understand that you will need to adjust end play by trimming the button or working on the cover. Looking for .005-.010" or so.
JIM
JIM
Le Mans Master
Joined: Apr 2006
Posts: 5,403
Likes: 95
Le Mans Master
Joined: Sep 2001
Posts: 7,739
Likes: 630
From: Unreconstructed, South Carolina
Romac Rollmaster timing sets with Iwis chains.
http://www.romacusa.com/RollmasterFeatures_2.html
*everything on internet's suspect; including the very words I just wrote.
http://www.romacusa.com/RollmasterFeatures_2.html
*everything on internet's suspect; including the very words I just wrote.
