68 console gauge cluster
Thread Starter
Burning Brakes
Joined: Jan 2010
Posts: 958
Likes: 88
From: Rexburg Idaho
68 console gauge cluster
I just replaced my cars wiring from front to back Lectric Limited wiring harness and the temp and amps gauges don't work. I have already had some wiring problem with there products. The AIM shows a black / black & white wires going to the amp gauge and a pink / green / black wire going to the temp gauge. I have those colors in the electrical pig tails going to them but I'm concerned about the order of the wires. Does any one have a picture of them or know the proper order from the top to bottom?? 
Instructor
Joined: Jul 2004
Posts: 202
Likes: 0
Thread Starter
Burning Brakes
Joined: Jan 2010
Posts: 958
Likes: 88
From: Rexburg Idaho
Melting Slicks
Joined: Feb 2001
Posts: 3,330
Likes: 13
From: Europe , Luxembourg
Hi
Me too pls.
My ladie's harness will be replaced as well one of this days, so always good to know that there is s harness problem before pulling my hairs.
You can also mail this info to me, up to you.
to MEEKO at VO.LU , pls ( replace the at with a @ of course.
Thanks so much for this info.
Rgds. Günther
Me too pls.
My ladie's harness will be replaced as well one of this days, so always good to know that there is s harness problem before pulling my hairs.
You can also mail this info to me, up to you.
to MEEKO at VO.LU , pls ( replace the at with a @ of course.
Thanks so much for this info.
Rgds. Günther
