let the work begin.
Safety Car
Joined: Aug 2000
Posts: 3,711
Likes: 43
From: San Antonio TX
A bearing, yes. A rod, no. You can not withdrawl the piston out of the bottom of the engine. But there's some texture in the bearing question since sucess depends upon the condition of the crank journal. Putting a new bearing on a crank that needs a regrind is not a consideration you should even ponder.
Instructor
Joined: Jan 2008
Posts: 208
Likes: 0
From: McDonough GA
Do it right or do it twice
Pull the engine and rebuild it right. Or you'll install problems and be right back where you are now. "There aren't any easy solutions but there are some simple ones." - Ronaldus Maximus
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
