brake line routing question....
#1
Drifting
Thread Starter
brake line routing question....
i'm putting my new calipers and brake lines on my 68' BB chasis (frame off resto)
on the rear calipers there is a steel line from caliper to the rubber brake hose....since this is a big block car, i have a rear sway bar. does the steel line go inboard around the bar bracket or between the bracket on the trailing arm and the caliper??? (hope this makes sense)
i'm guessing that it routes inboard around the bracket then to the caliper. any body know for sure, or have pics? thanks, Rick
on the rear calipers there is a steel line from caliper to the rubber brake hose....since this is a big block car, i have a rear sway bar. does the steel line go inboard around the bar bracket or between the bracket on the trailing arm and the caliper??? (hope this makes sense)
i'm guessing that it routes inboard around the bracket then to the caliper. any body know for sure, or have pics? thanks, Rick
#4
Melting Slicks
I don't believe all the T/A lines have the wound wire, depending on the year.
But yes, they only go on one way.
-W
But yes, they only go on one way.
-W
Last edited by Clams Canino; 05-05-2010 at 05:51 PM.