69 Corvette Speaker Upgrade
Safety Car
Joined: Jun 2005
Posts: 3,775
Likes: 4
i had to tear apart my dash a few days ago, so i just went out and grabbed some pictures of my set up, with out the kick panel on.
im using polk momo MMC460 50wRMS @4OHM
they slip behind the lip of the birdcage, tight fit but they do fit. you can drill a couple holes through the birdcage metal for a couple bolts for the speakers.
the kick panels go right over the top, no moddng required.
im using polk momo MMC460 50wRMS @4OHM
they slip behind the lip of the birdcage, tight fit but they do fit. you can drill a couple holes through the birdcage metal for a couple bolts for the speakers.
the kick panels go right over the top, no moddng required.
Safety Car
Joined: Jun 2005
Posts: 3,775
Likes: 4
previous owner did the cutting. im not entirely sure how much was taken out, but looking at the cuts, it should still fit back there with out an issue. i havnt bolted my speakers in yet, and i dont think theyre going to move or be a problem. if im wrong, ill have to put a couple of bolts in. as for the radio, i changed the radio out long long ago. put a real nice amp and headunit in.
