turn signal indicator lamp replacement
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,117
From: Crossville TN
If you are a midget, a contortionist or have a 'savant' four-year old grandson who can follow detailed instructions you can do it from under the dash. For the rest of us, it's time to remove the driver's seat from the car and "dig in". Actually, I think you can reach many of those sockets from below. But, be very careful in pulling the sockets out from the housing; many times they separate and the blub and/or the metal contact ring dislodge and can fall INTO the housing. Not a good thing. And remember to pull the battery cable before you start that project.
Change all of the bulbs you can possibly reach once you are in there. Once is enough!
Change all of the bulbs you can possibly reach once you are in there. Once is enough!
Race Director
Joined: May 2006
Posts: 16,528
Likes: 53
From: Dayton, Ohio
The cluster comes out the front,hardest part is unhooking the speedo cable.
