Windows won't work.
Thread Starter
4th Gear
Joined: May 2010
Posts: 4
Likes: 0
From: Port Huron MI
Windows won't work.
Hi,I'm Fred and I'm new to the world of corvettes.I just bought my first one.1978 L82, I drove it for a week or so and the other day I put the windows up and later tried putting them down.Both sides don't work now.I looked for a fuse in a book and my car doesn't show one.Looks to me the other owners did some moving around.So I looking for help if anyone knows what I should look for next and where.Thanks for any help...Fred
Race Director
Joined: May 2006
Posts: 16,528
Likes: 53
From: Dayton, Ohio
Fred you probably just kicked some wires out of the fuse box with your big feet 
, 12 orange /black stripe and 18 pink / black stripe
If not check the PWR ACCY circuit breaker at the top of the fuse box.
Then check the the GAUGES fuse
, 12 orange /black stripe and 18 pink / black stripeIf not check the PWR ACCY circuit breaker at the top of the fuse box.
Then check the the GAUGES fuse
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,116
From: Crossville TN
I don't know about your year car, but early C3's had a circuit breaker for the power windows on the driver's side of the firewall (engine compartment). {elongated silver cannister with two studs/nuts connecting the power leads}
Thread Starter
4th Gear
Joined: May 2010
Posts: 4
Likes: 0
From: Port Huron MI
Thanks Roger.I did kick something down there and knocked a wire off.It's a mess at the fuse box,but I did fix it.Thanks to 7T1 vette also for your help.
Last edited by freddy t o; May 24, 2010 at 12:59 PM.
