Binding in Points Distributor?

Reply Subscribe

Thread Tools

Search this Thread

May 30, 2010 | 11:11 AM

Ethan1

Thread Starter

Intermediate

Joined: Jun 2008

Posts: 28

Likes: 0

Binding in Points Distributor?

I have a '70 points type distributor and when I go to turn the distributor gear, I notice that it catches on something. It still turns though. What could be causing this?

Thanks,
Ethan

May 30, 2010 | 07:24 PM

7T1vette

Team Owner

Joined: Jan 2006

Posts: 37,637

Likes: 3,116

From: Crossville TN

Am I to assume that the distributor is out of the vehicle? If so, it is likely binding on some damaged tach drive gears. Unscrew the outer brass fitting at the tach drive and remove it and the driven gear. You will probably find a damaged driven gear. If not, dig deeper to see if the drive gear (on the center shaft) is damaged or has debris in it.

May 30, 2010 | 09:57 PM

Phil Zell

Drifting

Joined: Nov 2003

Posts: 1,874

Likes: 7

From: l In

If the spring on the points is heavy duty, that could be what you are feeling and that is not a problem

May 30, 2010 | 10:31 PM

Ethan1

Thread Starter

Intermediate

Joined: Jun 2008

Posts: 28

Likes: 0

Quote:

Originally Posted by Phil Zell

If the spring on the points is heavy duty, that could be what you are feeling and that is not a problem

This is what I think it is as well. I'll check the drive gear anyways. Thanks guys!

Reply Subscribe