ZZ4 HEADERS?
Pro
Joined: Nov 2000
Posts: 594
Likes: 0
From: Tucson AZ
Re: ZZ4 HEADERS? (Ken74Conv)
Hedman block hugger style - The true equal-length type I tried first fit but one tube blocked the clutch shaft that runs from the engine to the frame.
I now am running RPM 6085 centerbolt heads, H.O.T. cam, 1.6 rockers and ProFlo EFI. In the process of getting it running now.
BTW - A friend now has my old ZZ4 heads along with a performer RPM intake and XE268 cam in his previously stock 76 motor. He bought hedman headers also. The car runs like a bat! :D :D
I now am running RPM 6085 centerbolt heads, H.O.T. cam, 1.6 rockers and ProFlo EFI. In the process of getting it running now.
BTW - A friend now has my old ZZ4 heads along with a performer RPM intake and XE268 cam in his previously stock 76 motor. He bought hedman headers also. The car runs like a bat! :D :D
Instructor
Joined: Jul 2000
Posts: 239
Likes: 5
From: Rochester NY
Re: ZZ4 HEADERS? (Ken74Conv)
Ken,
I run Hooker Super Competition 1 3/4" tubes, Ceramic coated headers.
They fit really well no flow restrictions or problems with clearence easy to install and they don't melt any of my plug wires. They are expensive but you get a quality product...
I run Hooker Super Competition 1 3/4" tubes, Ceramic coated headers.
They fit really well no flow restrictions or problems with clearence easy to install and they don't melt any of my plug wires. They are expensive but you get a quality product...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Feb 1999
Posts: 29,077
Likes: 0
From: Deep East Texas
Re: ZZ4 HEADERS? (Green76)
Ken,
I run Hooker Super Competition 1 3/4" tubes, Ceramic coated headers.
They fit really well no flow restrictions or problems with clearence easy to install and they don't melt any of my plug wires. They are expensive but you get a quality product...
I run Hooker Super Competition 1 3/4" tubes, Ceramic coated headers.
They fit really well no flow restrictions or problems with clearence easy to install and they don't melt any of my plug wires. They are expensive but you get a quality product...
Me, too...
Racer
Joined: Mar 2002
Posts: 369
Likes: 1
From: Nowhere
Re: ZZ4 HEADERS? (Ken74Conv)
I run Hooker headers on mine also from Summitt Racing. I thought I would save money and buy the none ceramic coated ones, but have soon taken them off and had Airborne Coatings put a ceramic/black coating on it, so much better looking now, and lot cooler in the engine compartment now.
These were expensive, but worth it to me.
These were expensive, but worth it to me.
Heel & Toe
Joined: Apr 2002
Posts: 15
Likes: 0
Re: ZZ4 HEADERS? (Chris Butchart)
Dynomax Ceramic Coated- Fit great only $219.00 from Jegs :D
Was hoping for those, they are a good price and I have heard good comments on them. Guess I'll have to look for a different brand, probably Hooker as I've had those on several rides and had good luck with them.
Rad..
Le Mans Master
Joined: Mar 2002
Posts: 7,056
Likes: 40
From: Life is Messy, Bring a mop
Re: ZZ4 HEADERS? (Mike69)
Mike69,
Hooker assured me that their sidepipe headers wouldn't fit angle plug heads! Doesn't the ZZ4 have angle plugs?
If so, did you have to mod anything?
This was the build up I had planned but was changing my mind due to the info from Hooker.
:confused:
Hooker assured me that their sidepipe headers wouldn't fit angle plug heads! Doesn't the ZZ4 have angle plugs?
If so, did you have to mod anything?
This was the build up I had planned but was changing my mind due to the info from Hooker.
:confused:
Racer
Joined: Apr 2001
Posts: 413
Likes: 0
From: Bluffdale Utah
Re: ZZ4 HEADERS? (Ken74Conv)
Not to knock other header brands, but I've owned several on different applications and have only personally been happy with the Hookers. On the Vette I have the ceramic coated Hooker Super Comps and once again am very happy with them. Expensive, but worth it.
Drifting
Joined: Jul 2001
Posts: 1,527
Likes: 0
From: Tucson AZ
St. Jude Donor '11,'13
Re: ZZ4 HEADERS? (Ken74Conv)
I put Sanderson's on mine, they have a set that is made for the ZZ4 and better yet a set for the 385 Fast burn heads. Bolted right up with no problem and no leaks.
Heel & Toe
Joined: Apr 2002
Posts: 15
Likes: 0
Re: ZZ4 HEADERS? (1980ZZ4)
You guys that have the Hooker Super Comps, what part number did you use? I show 2 possible, both have 1 3/4 primaries, one is 28" tubes, the other is 25" tubes. They also have different collector lengths. Which are you guys running:
2108 - 28" tubes, 8" collector length
2134 - 25" tubes, 10" collector length
Here's the application chart at their website:
http://www.holley.com/HiOctn/ProdLin....html#Corvette
I will be getting the thermal coating, but trying to figure which one of these is right for me.
Rad...
2108 - 28" tubes, 8" collector length
2134 - 25" tubes, 10" collector length
Here's the application chart at their website:
http://www.holley.com/HiOctn/ProdLin....html#Corvette
I will be getting the thermal coating, but trying to figure which one of these is right for me.
Rad...
