Iskenderian cam specs.
Thread Starter
1st Gear
Joined: Oct 2010
Posts: 1
Likes: 0
Iskenderian cam specs.
Hi guys, im new here from Australia. I have been trying to track down my cam specs a SBC 350 for a few weeks here, as these are not common over here.
Cam has stamped on it W90R,
ISKENDERIAN,
708,
Z.70 E,
201
Can any one who has an old catalogue please help me out, it seems like it has very little were on the cam, I would hate to have to can it, but.......
I have scoured the net and emailed isky cams themselves a dozen or more times with no avail, they have never contacted me at all.
I sure could use a leg up on this one guys!
Thanks guys cheers ben.
Cam has stamped on it W90R,
ISKENDERIAN,
708,
Z.70 E,
201
Can any one who has an old catalogue please help me out, it seems like it has very little were on the cam, I would hate to have to can it, but.......
I have scoured the net and emailed isky cams themselves a dozen or more times with no avail, they have never contacted me at all.
I sure could use a leg up on this one guys!
Thanks guys cheers ben.
Le Mans Master
Joined: Apr 2005
Posts: 6,350
Likes: 423
From: Seattle Area WA
Sure, ISKY grind numbers for their solids start with a Z. In this case I believe you have a grind number Z-70. Here it is on Summits site.
http://www.summitracing.com/parts/ISK-201070/
http://www.summitracing.com/parts/ISK-201070/
