diff mount
Thread Starter
Melting Slicks
Joined: Apr 2008
Posts: 2,627
Likes: 242
From: Russell Ontario
St. Jude Donor '09
diff mount
I've replaced many front diff mounts on C-3, I usually do it without pulling the drive shaft out, but last night I was doing an 81 and it was a little more difficult than normal , I'm wondering you guys that do this often , do you pull the drive shaft off or not, just curious,Ron
Burning Brakes
Joined: May 2008
Posts: 1,116
Likes: 5
From: Middleburg Florida
Atually, you don't have to remove the drive shaft all together. Remove the bolts from the pinion yoke, and just slide the drive shaft forward into the trans. Should give you enough room to get the drive shaft out of the way.
