Phoenix, AZ Engine Machine Shops???
Thread Starter
Racer
Joined: Nov 2009
Posts: 423
Likes: 7
From: Utah
Phoenix, AZ Engine Machine Shops???
I really wanted to go LS in my 69 NOM 454, but I've decided to stay with the carbed BB ($$, time). It's a VERY mild build (don't have details), runs ok, but my wife's WRX can crush it, as can my Diesel Silverado.
I'm looking for a ~450-500hp fun driver w/ a streetable idle, vacuum, and decent manners.
Does anyone have recent good or bad experiences with any Phoenix area engine/machine shops? I've read what I could find, but there were only a few posts scattered around.
This will be bolted to a (soon to be ordered) TKO-600 from Keisler...
Thanks
I'm looking for a ~450-500hp fun driver w/ a streetable idle, vacuum, and decent manners.
Does anyone have recent good or bad experiences with any Phoenix area engine/machine shops? I've read what I could find, but there were only a few posts scattered around.
This will be bolted to a (soon to be ordered) TKO-600 from Keisler...
Thanks
Race Director
Joined: Sep 2002
Posts: 10,362
Likes: 5
From: San Diego - Deep Within The State of CONFUSION!
Hmmm I went to school in Tempe, mid-seventies. I remember Rundle's in Mesa as a machine shop and parts store. It was off University at some cross street in Mesa close to Tempe. But that's been a long time ago. I bought speed parts from Rundle all the time but built my own motors.
Don't know if he's even still in biz.
Don't know if he's even still in biz.
Drifting
Joined: Jan 2002
Posts: 1,645
Likes: 11
From: Schaumburg IL
Go to this link
http://www.azspeed-marine.com/
and read what they have to offer and maybe give them a call.
http://www.azspeed-marine.com/
and read what they have to offer and maybe give them a call.
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
Call Jake at 'Jake's Auto Repair' in Glendale. Tell him your situation and ask him for the recommendation(s). He doesn't do that work, but he's always working on one Corvette or another and he will know who to call.
Limping across the line
Joined: Oct 2002
Posts: 5,299
Likes: 109
From: Peoria Az
Call Ray at Basko Eng service.
480 967 1956
Tell him Phil sent you.
I've known Ray and Jim for over 25 years. They've built several engines for me and alot of other machine work.
They even have a in house dyno to run your engine on prior to installing if you desire
480 967 1956
Tell him Phil sent you.
I've known Ray and Jim for over 25 years. They've built several engines for me and alot of other machine work.
They even have a in house dyno to run your engine on prior to installing if you desire
