When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, if Lars really got the 'boot', CorvetteLoad must be 'connected' with the moderators, somehow. And if this is really the case, I won't we party to this Forum anymore (not that anyone will care ).
Well, if Lars really got the 'boot', CorvetteLoad must be 'connected' with the moderators, somehow. And if this is really the case, I won't we party to this Forum anymore (not that anyone will care ).
Im a Noob to CF, but not to turning wrenches. I have been a professional grease monkey for 10 years or so, and I learned a lot from Lars. So, EVEN I think this is BS. If it was over this piddly little stuff we need to get a lil more info on this. I think there HAS to be more to it if we are losing a guy like this.
I'm rather disappointed in the mods for this one as well. I emailed Lars and asked him to join another well known forum that is very good on technical questions to expound his knowledge. I hope he decides to post over there.
He was very selfless in sending everyone that asked the Q-jet tuning guide which I received and intend to give a try this winter. The tube bending incident was minor compared to what I've seen on other forums including this one. Everyone has their opinion but it seems that Lars could back his up to provide great knowledge that saved the OP some grief.
Last edited by 75+78 Corvettes; Dec 12, 2010 at 09:19 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
What a loss this will be. I have not been on here that long but have been long enough to see he is extremely knowlegable and always seems willing to help anyone. Just exactly what I am looking for on this site!
Well, if Lars really got the 'boot', CorvetteLoad must be 'connected' with the moderators, somehow. And if this is really the case, I won't we party to this Forum anymore (not that anyone will care ).
I am quite disappointed in the mods decision to pull Lars. He said and did nothing to warrant this.Might as well ban the rest of us too as I will be on another forum as well!!!!!
I don't think Lars has been banned. He is still in the Members list. He dropped out once before due to idiots arguing with him and he has probably done so again. Can't say I blame him.
I have been around this place for awhile and the moderators of this sand box are pretty thinned skin. I have seen it too many times over the years. So I am done here. There are better places to hang out then to put up with nonesence.
What a loss this will be. I have not been on here that long but have been long enough to see he is extremely knowlegable and always seems willing to help anyone. Just exactly what I am looking for on this site!
Well i would be happy if someone would point me in the direction of a forum where knowing wat your talking about is not frowned upon.
I would like to see simple answer instead of berating. Too often a question about how part X works will turn into how stupid you are for wanting part X when part Y is far superior and the original question never gets actually answered.