windshield install
Thread Starter
Heel & Toe
Joined: Apr 2009
Posts: 17
Likes: 0
From: williamstown nj
windshield install
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
Burning Brakes
Joined: May 2007
Posts: 1,022
Likes: 33
From: Lokeren, Belgium
Here ya go. 10 on mine
@Korevette, no the T trim is independent from these clips. They should be screwed to the header.The small trim piece has bended tabs with a sort of hem to thicken it so they clip
Nick
@Korevette, no the T trim is independent from these clips. They should be screwed to the header.The small trim piece has bended tabs with a sort of hem to thicken it so they clip
Nick
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,847
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
http://willcoxcorvette.com/advanced_...&keywords=clip
Instructor
Joined: Oct 2006
Posts: 127
Likes: 0
From: Monroe Washington
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
Ron
http://www.speakeasy.org/~pws/Corvette.htm
Thread Starter
Heel & Toe
Joined: Apr 2009
Posts: 17
Likes: 0
From: williamstown nj
thanks alot for the help guys. so i guess just buy the clips and screws and make my own holes? cause my frame has no holes and no sign of holes being there ever. and i know the car was never taken apart until me.
