Mentor
Thread Starter
2nd Gear
Joined: Aug 2011
Posts: 2
Likes: 0
Mentor
Hello All, I'm a 24 year old and I just purchased a 79' Corvette. I have always had an interest in buying one and fixing it up, but I don't have much experience in the auto sector. I was just wondering if anyone in the forum would be interested in being my mentor for this project. I would just like someone to bounce ideas off because I really don't have anyone that I can ask questions to. If you would be interested, just let me know. I would very much appreciate it. Thanks, MM
Melting Slicks
Joined: Jul 2009
Posts: 3,264
Likes: 3
From: Vero Beach FL
Hey MM
There is a lot of knowledge here on the CF you will find that there are certain members that are more knowledgeable about different areas of the car. Take advantage of all members and their knowledge.
There is a lot of knowledge here on the CF you will find that there are certain members that are more knowledgeable about different areas of the car. Take advantage of all members and their knowledge.
Last edited by Roco71; Aug 30, 2011 at 09:54 AM.
Drifting
Joined: Jun 2007
Posts: 1,404
Likes: 1
From: Ansonia/NYC CT
I was in the same boat as you a couple of years ago, when I got my '76. I struggled for a while, then I found this forum, and it's been magic ever since. Frustrating, sometimes, but that's cars, especially older ones. Anyway, couple years later, and now I actually consider myself a pretty accomplished guy, in terms of mechanical ability and know how, and my car is, little by little, starting to show it.
It's important we get guys like you and me in here, to learn from the other guys, because we then pass on our knowledge to the next batch, as it were. So, when you do have a question, get it answered, and then do the corresponding work on your car, and it comes out ok, don't hesitate to chime in on it when you see someone else asking the same question or having the same problem you once had.
Welcome to the club!
It's important we get guys like you and me in here, to learn from the other guys, because we then pass on our knowledge to the next batch, as it were. So, when you do have a question, get it answered, and then do the corresponding work on your car, and it comes out ok, don't hesitate to chime in on it when you see someone else asking the same question or having the same problem you once had.
Welcome to the club!
Drifting
Joined: Sep 2010
Posts: 1,581
Likes: 50
From: Prosper TX
As Kevin said, welcome to the club! This forum is full of great mentors and it's available nearly around the clock. Use the search feature of this website along with the FAQ sticky up top as a starting point.
HOWEVER....most importantly...how about some pics of your car???
HOWEVER....most importantly...how about some pics of your car???
Racer
Joined: May 2011
Posts: 431
Likes: 0
From: Willoughby Hills OH
ya, location would definitely help. My shop guy has owned 4 c3's in his day, huge mentor.
but when I dont understand car lingo one bit (huge n00b right now) it goes right in one ear and out the other.
but when I dont understand car lingo one bit (huge n00b right now) it goes right in one ear and out the other.
Le Mans Master
Joined: Jun 2004
Posts: 6,231
Likes: 65
From: Seattle WA
St. Jude Donor '14
This is a great community with a ton of experience and expertise.
That said, having experienced eyes and hands right there to help will make a big difference!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,482
From: Southbound
Cruise-In II Veteran
Welcome. Here's Mentor Post #1:
Do you have an owner's manual for your 79? If not, order a reproduction manual and read through it when it arrives.
My suggestion would be to purchase the 79 GM Chassis Service Manual and the 79 assembly instruction manual (AIM). Both will be helpful in the future.
Do you have any factory documentation with your car? Dealer invoice, window sticker, original Corvette order copy, etc?
Go here and see if you can obtain a copy of the original dealer invoice for your 79. http://www.corvetteactioncenter.com/...x.php?cmd=area
You will want a Corvettte library. Start here:
Do you have an owner's manual for your 79? If not, order a reproduction manual and read through it when it arrives.
My suggestion would be to purchase the 79 GM Chassis Service Manual and the 79 assembly instruction manual (AIM). Both will be helpful in the future.
Do you have any factory documentation with your car? Dealer invoice, window sticker, original Corvette order copy, etc?
Go here and see if you can obtain a copy of the original dealer invoice for your 79. http://www.corvetteactioncenter.com/...x.php?cmd=area
You will want a Corvettte library. Start here:
Pro
Joined: Jun 2006
Posts: 575
Likes: 3
From: Tampa / Ft. Myers FL
This forum's SEARCH button will become your best friend and confidence builder (in addition to the books mentioned above). Don't be afraid to ask about anything; (after searching) everyone is here to learn and help where they can.
Welcome to a great resource.
Welcome to a great resource.
Thread Starter
2nd Gear
Joined: Aug 2011
Posts: 2
Likes: 0
Hi Guys, Thanks for the responses! I have ordered the owners manual, shop manual and a few other documents. I actually live in Elkins, WV. Any chance anyone out there lives close? I did find out that one side of my tranny cover was lose which was causing a vibration. I plan on fixing that this evening. I took it for its first drive yesterday and it was great other than the vibration. Thanks for the advice and Ill definatley ask questions on here. Let me know if you guys have any advice for someone with little to no experience under the hood. One of my buddies find it funny that Im a computer hardware/software tech but don't know much about a cars mechanical functions. I hope everyone has a great day and I hope to hear from you all soon.
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,482
From: Southbound
Cruise-In II Veteran
