Door panel removal?

Reply Subscribe

Thread Tools

Search this Thread

Sep 22, 2011 | 01:28 PM

trainor

Thread Starter

Racer

Joined: Oct 2010

Posts: 474

Likes: 0

From: Bishop CA

Door panel removal?

I need to remove the door panel, drivers side on my 75, any clues on the best way to do this. Thanks in advance.

Sep 22, 2011 | 02:11 PM

trainor

Thread Starter

Racer

Joined: Oct 2010

Posts: 474

Likes: 0

From: Bishop CA

Quote:

Originally Posted by trainor

I need to remove the door panel, drivers side on my 75, any clues on the best way to do this. Thanks in advance.

I have both lower screws front and back out and the twist lock handle removed. Does the grab handle come off, it has a screw in the bottom but not the top, also does the door opener handle need to come off.

Sep 22, 2011 | 02:18 PM

MelWff

Race Director

Joined: May 2006

Posts: 18,771

Likes: 2,597

On my 69 the grab handle has to be removed, 2 screws, and the handle to open the door, 1 screw, inaddition to what you have already removed.

Sep 22, 2011 | 05:38 PM

Alan 71

Team Owner

Joined: Sep 2006

Posts: 31,315

Likes: 4,418

From: Westminster Maryland

Hi t,
I agree with MW, 2 screws on the door pull.
I also take off the latch handle while the panel is still on. Otherwise, it needs to slide through the panel as you take the panel off. It's pretty easy to get off, but harder to get back on once the panel is back in place.
Regards,
Alan

Reply Subscribe