Help Me Identify This Plug
Thread Starter
Melting Slicks
Joined: Apr 2010
Posts: 2,794
Likes: 1,195
From: Canberra Australia
2025 C3 of the Year Finalist - Modified
Help Me Identify This Plug
Hi
I am fitting a new engine wiring harness to my 71 with Auto and a/c.
On the drivers side between the power booster and wiper motor are mounted the 2 CEC relays but there is also another plug that comes out of the harness at the same point.
The one I am trying to identity has an orange and a tan wire going into the plug.
Craig
I am fitting a new engine wiring harness to my 71 with Auto and a/c.
On the drivers side between the power booster and wiper motor are mounted the 2 CEC relays but there is also another plug that comes out of the harness at the same point.
The one I am trying to identity has an orange and a tan wire going into the plug.
Craig
Last edited by CraigH; Sep 28, 2011 at 10:42 PM.
Thread Starter
Melting Slicks
Joined: Apr 2010
Posts: 2,794
Likes: 1,195
From: Canberra Australia
2025 C3 of the Year Finalist - Modified
Ok It just hit me, its the auto transmission kickdown plug from the accelerator pedal.
But how do I get the wires through the new firewall grommet.
Craig
But how do I get the wires through the new firewall grommet.
Craig
Intermediate
Joined: Nov 2009
Posts: 47
Likes: 1
From: townsville q.l.d.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,851
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
You un-pin them.. if you look at the terminal on the inside.. you'll see a section sticking upward. This is what holds the terminal in the plastic connector. Take a small thin screw driver and push inward and it will release.
I have a pic of this somewhere.. hold on. I can't find it.. I'll keep looking.
I have a pic of this somewhere.. hold on. I can't find it.. I'll keep looking.
Last edited by Willcox Corvette; Sep 28, 2011 at 11:25 PM.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,851
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
OK.. remembered where it was at.. go to this link..
http://willcoxcorvette.com/repairand...lp.php?hID=313
Ignore what it says its for and click on supporting document.
Once open go to page 8 and you'll see instructions on how to un-pin the wire from the connector... Real easy..
http://willcoxcorvette.com/repairand...lp.php?hID=313
Ignore what it says its for and click on supporting document.
Once open go to page 8 and you'll see instructions on how to un-pin the wire from the connector... Real easy..
