Some pics, engine fit up
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 836
Likes: 26
From: Harrisburg Pa
Some pics, engine fit up
My 69 is starting to come to life, just stuck in the Big M block, heads and old trany to check fit of Hooker side pipes, had to cut some lower body in front section but fit up very well in engine compartment.
Then went overboard and sat the blower on top with the BDS fuel injection unit.
got the firewall painted also. could someone please post these for me.
dont know why the pic is small, sorry
Then went overboard and sat the blower on top with the BDS fuel injection unit.
got the firewall painted also. could someone please post these for me.
dont know why the pic is small, sorry
Last edited by TOM B1; Mar 21, 2012 at 09:53 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Jul 2004
Posts: 12,706
Likes: 329
From: Scottsdale Arizona
Maybe you could get e high rise hood? Looks like you only need around 14 inches or so
On first glance, I thought you had a small block in there. That supercharger is a little large.