Exhaust Question
Team Owner
Joined: Sep 2006
Posts: 31,342
Likes: 4,459
From: Westminster Maryland
Hi P,
I'm not sure about 2 1/2", but 2" uses the donuts and inner sleeves on each side. The donut makes the seal between the head-pipe flange and the body of the heat-riser.
Regards,
Alan
I'm not sure about 2 1/2", but 2" uses the donuts and inner sleeves on each side. The donut makes the seal between the head-pipe flange and the body of the heat-riser.
Regards,
Alan
