0Willcox Corvette

I boosted the quality on this one so you can watch it in full screen and really get the details.

0Willcox Corvette

bump

0Willcox Corvette

Can't believe I didn't post this one.. but here is the wiper motor (electrical) relay repair video.

Here is the how to repair your wiper relay if this is the problem.

0Willcox Corvette

Coming soon.. Wiper Switch Rebuilding and Repair 78-82.

0Willcox Corvette

I got this one finished first...

A pretty short video that will give you the basics on how to tear apart and fix most power window switches.

Hope you enjoy it... Suggestions are always welcome too! If you have a suggestion, please feel free to email this to us at Support@Willcoxcorvette.com

0Willcox Corvette

bump

0Willcox Corvette

bump

0Willcox Corvette

bump

0Willcox Corvette

bump

0Willcox Corvette

84-96 B Pillar Weatherstrip Installation Tips.

1970greenLS5

Thanks for all these great how to's! They've helped me out quite a bit. Couple ideas for videos:

1) How to install the center instrument cluster bezel into car with AC (without damaging anything!)
(2) Installing and adjusting door glass and T-top weatherstrips
(3) Repair of fiber optic cables

Steve

bluedawg

Thanks! I second the sticky out of this, I've got it tagged with my mobile app.

C3Paul

Mr Willcox,
Would you be so kind and make a video of: How to Install C3 Windshield with all the chrome trims, please?
Paul

0Willcox Corvette

Bluedawg- I'm sorry this can not be a sticky.. rules are rules and this portion of the forum is sponsored by another vendor. If this thread were to become open for sponsorship I'll do it and then we can get it made a sticky..

Paul... That sucks.. We just did a installation.. it never dawned on me to video it.. I did post some pictures on our facebook page though.

I'm glad these are helpful to you everyone. I have two more quick videos to post up tonight or tomorrow on testing a power window motor relay and looking inside a 78-82 fuel tank..

Fiber optic repair is tricky. First you must realize that it matters not how good the repair is, you'll still lose brightness in the light from a repair. To repair, you have to cut the ends flat, then make sure you butt the two ends together and then use heat shrink tubing. The trick is to heat the heat shrink with a blow drier vs. a small torch and holding the two halves together while you do this.. Not a hard fix a all.

I have a write up on my page about how to install the dash pad on a 68-77 and in this it walks you through how to install/remove the center dash bezel. I'll add this one to the list though.

Thank you all..

Willcox

0Willcox Corvette

Power window relay testing 1968-1978 Not the best quality but we were in a hurry on this due to a customers questions. We'll do this one over again when we get some free time.


Here is the diagram to use.

bluedawg

It shouldn't matter that you don't sponsor thus section, this is truly help full material and even if you don't sponsor this section, it should go as a sticky or maybe the sponsor should put together this kind of material and make a sticky.

bluedawg

I've put in motion a member petition toward getting this made a sticky. It is truly c3 tech material.

0Willcox Corvette

That's a nice gesture, but its not needed. If one of the C3 threads becomes available, I'll pick it up.

AirborneSilva

Thanks for taking the time to not only make these videos but also to post them and here's a bump back to the top...

C3Hawk

I bet a video about removing and reinstalling the steering column would get a lot of views!

Again, thanks for the videos so far.