Rag Joint
Thread Starter
2nd Gear
Joined: Aug 2012
Posts: 2
Likes: 0
Rag Joint
I just set the body of my 73 back down on the frame with new poly body cushions....the problem is the rag joint for the steering doesn't line up...it's fine from left to right, but the the steering column is an inch higher than the steering box.....any suggestions ????
Safety Car
Joined: Aug 2001
Posts: 3,685
Likes: 202
From: Waterford Mi
On the floor there are two bolts that can be loosened to allow the column to move up or down. Make sure your body mount bolts are tight before you re-tighten the column bolts because the mounts will compress some.
