Led tailight problem
Thread Starter
2nd Gear
Joined: Sep 2012
Posts: 2
Likes: 0
Led tailight problem
I just purchase LED Tailights for my 78. I purchased them thru Corvette Central along with a spare led flasher identical to the one that came with the lights from United Pacific P/ N 90650.
The flasher has 2 prongs configured identical to a standard flasher as well as a ground wire coming from the rear of the flasher case. I plugged it in grounded the black wire and the turn lights stay on solid. However the hazard lights flash. I tried both flashers and have remote wired them
in various configurations with no luck. Does anyone have any suggestions.
The flasher has 2 prongs configured identical to a standard flasher as well as a ground wire coming from the rear of the flasher case. I plugged it in grounded the black wire and the turn lights stay on solid. However the hazard lights flash. I tried both flashers and have remote wired them
in various configurations with no luck. Does anyone have any suggestions.
Thread Starter
2nd Gear
Joined: Sep 2012
Posts: 2
Likes: 0
I tried reversing the wires. I then took the LED flasher out
and replaced it with the stock flasher. The hazard lights still flash at a normal rate, and they continue to flash when the headlights are turned on.
and replaced it with the stock flasher. The hazard lights still flash at a normal rate, and they continue to flash when the headlights are turned on.
Platinum Supporting Vendor
Joined: Feb 2004
Posts: 1,771
Likes: 37
From: Sawyer MI
I just purchase LED Tailights for my 78. I purchased them thru Corvette Central along with a spare led flasher identical to the one that came with the lights from United Pacific P/ N 90650.
The flasher has 2 prongs configured identical to a standard flasher as well as a ground wire coming from the rear of the flasher case. I plugged it in grounded the black wire and the turn lights stay on solid. However the hazard lights flash. I tried both flashers and have remote wired them
in various configurations with no luck. Does anyone have any suggestions.
The flasher has 2 prongs configured identical to a standard flasher as well as a ground wire coming from the rear of the flasher case. I plugged it in grounded the black wire and the turn lights stay on solid. However the hazard lights flash. I tried both flashers and have remote wired them
in various configurations with no luck. Does anyone have any suggestions.
