Tach reading incorrect - new board
Thread Starter
Burning Brakes
Joined: Jan 2006
Posts: 1,223
Likes: 174
From: Fort Wayne IN
Tach reading incorrect - new board
My tach has never worked since I owned the car, so I recently bought a new tach board. I got that all put back together, started it up and it works!
But wait, it appears to be reading way too high. I bought a new tach filter as well and tried it with and without that installed.
Before the repair, the tach was stuck at about 2000 RPM and never moved. Should I have manually zeroized the needle when I had the tach apart?
http://www.youtube.com/watch?v=Psalm4ysDvg
But wait, it appears to be reading way too high. I bought a new tach filter as well and tried it with and without that installed.
Before the repair, the tach was stuck at about 2000 RPM and never moved. Should I have manually zeroized the needle when I had the tach apart?
http://www.youtube.com/watch?v=Psalm4ysDvg
Last edited by bluthundr; Sep 8, 2012 at 06:39 PM.
Thread Starter
Burning Brakes
Joined: Jan 2006
Posts: 1,223
Likes: 174
From: Fort Wayne IN
Fixed my video, and found Willcox's video of the step I missed:
http://www.youtube.com/watch?v=bA3khKLw2Ys
Oh well, the column should come out a lot easier this time!
http://www.youtube.com/watch?v=bA3khKLw2Ys
Oh well, the column should come out a lot easier this time!
