Water Pump

Reply Subscribe

Thread Tools

Search this Thread

Oct 24, 2012 | 11:22 AM

billkat

Thread Starter

Intermediate

Joined: Jul 2009

Posts: 46

Likes: 0

Water Pump

My 72 has a Moroso WP P/N 63505 with 3/4" shaft. Is there a rebuild kit ? think the bearing is worn as the shaft has lots of shake. I looked at a WP from ZIP P/N WP-101 but do not know the dia. of the shaft on that part. Is the ZIP one 3/4" ?

Oct 24, 2012 | 11:25 AM

MelWff

Race Director

Joined: May 2006

Posts: 18,734

Likes: 2,582

There is a gasket and seal kit or you can order another one. WP-101 is an iron pump.

http://www.summitracing.com/parts/MO...s/?prefilter=1

Last edited by MelWff; Oct 24, 2012 at 11:28 AM.

Oct 24, 2012 | 11:36 AM

billkat

Thread Starter

Intermediate

Joined: Jul 2009

Posts: 46

Likes: 0

Quote:

Originally Posted by MelWff

There is a gasket and seal kit or you can order another one. WP-101 is an iron pump.

http://www.summitracing.com/parts/MO...s/?prefilter=1

Thanks for the reply. I went to Summit looking at the pumps. I openend the pump this morning and the impeller looks ok. Those seals will take care of the slop in the shaft ? It doesnt not leak, but made a heck of a racket with the slop.

Oct 24, 2012 | 02:27 PM

MelWff

Race Director

Joined: May 2006

Posts: 18,734

Likes: 2,582

If you have side to side slop I would say the bearing is shot. You can check the Moroso site to see if they sell the bearing.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump