When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a '81 with pulse wipers. The wiper motor cleans the windshield and wipes three times when the button is pushed. No low or high speeds. I do hear the relay in the jack compartment clicking. Before I pull out my trusty voltmeter does anybody have an idea where to start? I've reviewed some past threads and am about to start the trouble shooting process. Where would you recommend that I start first? Switch, motor, relay?
I plugged the bypass harness into the wiper delay module harness. This did not fix the problem. I still have the same symptoms. Wiper motor checks out ok. Switch has to be the problem. I'm not looking forward to gutting the dash anytime soon so I guess this drought in Texas is somewhat of a good thing for now.
I took the switch out and cleaned it per Willcox's excellent instructions. Now my wipers work but will not turn off. I guess it's time to locate a switch.
Great news for all who give a care. There is finally a reproduction switch for sale for the 78-82s with delay wipers. I purchased one and guess what? It's raining so I can't work on the thing yet. Go figure.
I installed the reproduction switch and I have all wiper functions except delay. Guess it's time for the new reproduction pulse wiper module that just came out?
Seriously!
I'm about to do the SAME thing to my '80.
If you don't mind posting up some details?
I have to go through mine and trouble shoot it. I don't drive it in the rain but I don't want to be stuck out there in the middle of a down pour and not have my wipers.
I didn't do much troubleshooting. I just replaced parts until it worked right. I knew my wiper motor was good as the PO had just replaced it. I took my out switch out and cleaned it. That didn't fix it so I knew I needed a switch.
The Willcox Corvette website has tech articles on how to access the switch and clean it. The links are posted earlier in this thread.
Most forum vendors now have the reproduction switch and wiper delay modules for the late model C3s.
did you buy the parts from wilcox? I am going to have to do this little project as well. I have lost the pulse side of my switch. was not too worried about it this summer. it did not rain!!